Table of Contents
Advertisement
4.1.4
Intel
This feature requires a KEY module to enable CPU RAID functions with Intel
•
•
•
•
If you plan on using the CPU RAID configuration spanned across different PCIE slots as
OS drives, please install the Hyper M.2 X16 Cards to PCIEX16 slots.
To enter the Intel
®
1.
Enter the BIOS Setup during POST.
2.
Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then
set the item to [Disabled].
3.
Go to the Advanced menu > CPU Storage Configuration, then set the PCIE slot(s)
that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to Hyper
M.2 X16 or PCIE X4 SSD Card correspondingly.
4.
Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5.
Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD
Controllers, then press <Enter> to display the Intel
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
4-6
Virtual Raid on CPU in UEFI BIOS
®
The KEY module is purchased separately.
The HYPER M.2 X16 Card is purchased separately.
Due to CPU behavior, CPU RAID functions with Intel
Skylake-W Series Processors.
Refer to section 1.1.9 Internal connectors for the location of the VROC_HW_KEY
connector.
Virtual Raid on CPU in UEFI BIOS:
CPU RSTe.
®
CPU RSTe only supports Intel
®
Virtual Raid on CPU menu.
®
Chapter 4: RAID Configurations
®
Advertisement
Table of Contents
