Basic Settings; Overview Of Basic Settings - NEFF S Series User Manual

Basic settings

You can configure the appliance to meet your needs.

Overview of basic settings

The basic settings depend on the features of your appliance.
Basic setting
Time setting
Time format
Time display
Sprache/Language
Water hardness
Rinse aid dispenser
Sensor setting
Extra Dry
Water connection
1
Factory setting (may vary according to model)
Selection
00:00 - 24:00
12 h
1
24 h
In hours
1
Time
See selection on the
appliance.
0 - 62
1
16 - 20 medium
0 - 6
1
5
1
Standard
Sensitive
Very sensitive
on
1
off
1
Cold water
Hot water
Description
Set the current time.
The setting depends on the time format selected.
Set the time format.
Set the time display for the end of the pro-
gramme.
"with display "Finish in"" shows the remaining
time the programme has to run, e.g. 3h 25min.
"or "Finish at"" shows the time when the pro-
gramme will end, e.g. 15:20 hours.
Select the menu language.
Set the water hardness.
→ "Overview of water hardness settings",
Page 30
Set or switch off the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid", Page 33
Set the water sensor for identifying soiling.
→ "Sensors", Page 14
Switch Extra Dry on or off for each operation.
For a better drying result the temperature is in-
creased during the final rinse. This may increase
the running time slightly.
Please take care with delicate tableware.
Set cold water or hot water connection.
Only set the appliance to hot water if this can be
prepared with little energy and a suitable installa-
tion is available, e.g. solar heating system with
circulation line. The water temperature should be
at least 40 °C and max. 60 °C.
Basic settings en
41