Setting Additional Functions; Setting Timer Programming; Starting The Programme; Activating Button Lock - NEFF S Series User Manual

Setting additional functions

You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 20
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 22
a The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.
Press ⁠ .
1.
Press or
2.
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "with display "Finish
in"" (e.g. 3h 25min) or "or "Finish
at"" (e.g. 15:20 hours). You can
change this setting in the Basic
settings → Page 41.
To activate timer programming,
3.
press ⁠ .
Tip: To deactivate timer program-
ming, press
3 seconds.

Starting the programme

Press .
▶
a The display shows the programme
information.
a The programme has ended when
the display shows "Finished".
repeatedly until the
for approx.
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 40
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Activating button lock

The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Requirement: A programme has
started. → Page 39
Press for approx. 3 seconds.
▶
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a The display shows "Activated child-
proof lock" when the appliance is
running.
a The button lock remains activated
with a power failure.

Deactivate button lock

Press for approx. 3 seconds.
▶

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
Basic operation en
39