Table of Contents
Advertisement
en Basic settings
15 Basic settings
Ba s i c s e t t i n gs
You can configure the basic settings for your appliance to meet your needs.
Ba s i c s e t t i n gs
15.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dis-
pensing
Intensive drying
Hot water
1
Factory setting (may vary according to model)
36
Display text Selection
1
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
1
A00
A00 - A01
Description
Set the water softening sys-
tem to your water hardness.
→ "Setting the water soften-
ing system", Page 25
Level H00 switches the wa-
ter softening system off.
Set the amount of rinse aid
to be dispensed.
Switch the rinse aid system
off with level r00.
The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time slightly.
Note: Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d01" or
off "d00".
Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this
can be prepared with little
energy and a suitable install-
ation is available, e.g. solar
heating system with circula-
tion line. The water temperat-
ure should be at least 40 °C
and max. 60 °C.
Switch hot water on "A01" or
off "A00".
Advertisement
Table of Contents
