Information On Display Panel; Malfunctions - NEFF S Series User Manual

Information on display panel

Errors
Special salt refill indicator
lights up.
Refill indicator for special
salt does not light up.
Refill indicator for rinse aid
lights up.
Refill indicator for rinse aid
does not light up.
Indicator for Easy Clean
lights up.

Malfunctions

Errors
Water is left in the appliance
at the end of the pro-
gramme.
Appliance cannot be
switched on or operated.
Appliance does not start.
Cause
Insufficient special salt.
Sensor does not detect spe-
cial salt tablets.
Water softening system is
switched off.
Insufficient rinse aid.
Rinse aid system is switched
off.
Machine care is recommen-
ded.
Cause
Filter system or area under
the filters is blocked.
Programme has not yet
ended.
Appliance functions have
failed.
The mains fuse has tripped.
Mains cable is not inserted.
Troubleshooting en
Troubleshooting
Add Special salt → Page 31.
▶
Do not use special salt tablets.
▶
Setting water softening system
▶
→ Page 30
Add Rinse aid → Page 32.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 33
→ "Setting the amount of rinse aid",
▶
Page 33
Run the Easy Clean programme
▶
without tableware.
Use a special machine care
‒
product.
The indicator will go out automatic-
ally after 3 wash cycles whether
Machine Care is carried out or not.
Troubleshooting
Clean the Filters → Page 44.
1.
Clean the Wastewater pump
2.
→ Page 58.
Wait until the programme ends or
▶
cancel the programme with reset.
→ "Terminate programme",
▶
Page 40
Pull out the mains plug or switch off
1.
the fuse.
Wait at least 2 minutes.
2.
Connect the appliance to the power
3.
supply.
Switch the appliance on.
4.
Check the relevant fuse.
▶
Check whether the socket works.
1.
55