Table of Contents
Advertisement
SHAKER TO BENCH TEMPLATE
IT IS HIGHLY RECOMMENDED TO MOUNT THE SHAKER TO THE
OPTIONAL PEDESTAL AND SECURE THE PEDESTAL TO THE FLOOR.
The shaker base is 8.0 inch (203 mm) by 10.5 inch (267 mm).
Drill five 13⁄32 inch (11 mm) holes in the surface and install the shaker
using 3⁄8 inch (10 mm) machine bolts.
NON CRITICAL
CENTER
DRAINAGE
HOLE
When moun�ng to a bench, it is recommended to use a very sturdy bench and
secure the bench to the wall where possible.
The bench surface should be stainless steel or other resistant material to prevent
the oil and or water from the shaker from corroding the bench surface.
8.0 INCH
Page 12
203 MILLIMETERS
PART # M-312 KD RV.8-2019-09-25
Advertisement
Table of Contents
