Table of Contents
Advertisement
PEDESTAL TO FLOOR TEMPLATE
The Pedestal includes six interior holes to mount
to a wheel and �re if desired. DO NOT use these
holes to mount the Pedestal to the floor,
damage will result. Use the outer holes in
Pedestal base to mount it to the floor.
The Pedestal base is 8.0 inch (203 mm) square.
Each moun�ng hole is at a 0.5 inch (12.5 mm) from outer edges.
The recommended bolt length for moun�ng the pedestal is 1.5 inch (38 mm) to 2.0 inch (51 mm)minimum.
Drill four holes in the floor and install the pedestal with expansion bolt anchors and 3⁄8 inch (10 mm) machine bolts.
The inner circles on the template are intended to assist with moun�ng the pedestal to a wheel and �re.
Remember to seal the shaker to the pedestal with a non silicone elas�c sealant to prevent leaks and reduce noise.
Page 11
PART # M-312 KD RV.8-2019-09-25
Advertisement
Table of Contents
