Operation - auna DisGo Box 2100 Manual

• Connect the AC IN to a household mains outlet, using the supplied mains cord. Or connect the DC 12V
IN with a matching AC/DC adapter, connecting the latter to a household mains socket.
• Switch the POWER switch on the rear to the AC position when using the AC mains cord, switch to DC
position when using an AC/DC power adapter. Switch to OFF to turn off. Use the POWER/STANDBY
button on the device front panel or on the RC to switch the unit on/off.
•
Select the desired function mode by pressing MODE repeatedly.
• Rotate the Volume knob to adjust the output volume.
• Optional: Connect other audio equipment such as PA or another amplifier to the LINE IN.
• Connect microphones to the MIC1 and MIC2 sockets on the front. Turn MIC VOL down completely
beforehand.
• Connect guitars or other musical instrumens to the GIT IN. Turn the GIT VOL down completely before-
hand.
•
Before powering on the wireless microphone, be sure to set the microphone volume knob and microphone
echo knob to zero. Once the wireless microphone is powered on, slowly turn up the microphone volume
and echo volume.
If you notice static or distortion in the wireless microphone replace the battery with a new one. When not in
use, turn off the power of the wireless microphone.

Operation

First Steps
The wireless microphone
13
www.auna.de