Electrolux WS140SL User Manual page 49

Installation
During installation, follow the instructions supplied

separately.
Only qualified personnel can install the appliance

and replace the cable.
The electric system must be equipped with a means

for disconnection, with a contact separation in all
poles that
overvoltage category III.
If a plug is used for the electric connection, then it

must be accessible after installation.
The connection should include correct earthing, in

compliance with current norms.
WARNING! Before connecting the appliance

compare the power data (voltage and frequency)
indicated on the characteristics plate with those of
the power supply in question. If these data do not
match there may be problems. In case of doubt,
contact an electrician.
WARNING! If the electrical wire plug is removed,

the appliance must be installed and connected by a
technician. Contact a qualified electrician who knows
and respects
manufacturer
damage resulting from fitting or connecting errors.
WARNING! The electrical safety of the appliance

can only be guaranteed if it is earthed. The
manufacturer
damage resulting from the absence of or defects in
the installation's protection system (e.g. electrical
shock).
provides full
current
cannot be
cannot be
disconnection
safety standards.
held responsible
held responsible
ENGLISH 49
under
The
for
for