Safety Notices; Electrical Safety Information - Ubiquiti UniFi USW-Industrial Quick Start Manual

20-11-2019
Power Method
Power Supply
Supported Voltage Range
Max. Power Consumption
(Excluding PoE Output)
LEDs
System
RJ45 Ports
ESD/EMP Protection
Shock and Vibration
Operating Temperature
Internal AC/DC @ 450W
Internal AC/DC @ 240W
Operating Humidity
Certifications

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING:
least 20 mm of clearance next to the ventilation holes for adequate airflow.
WARNING:
rain or moisture.
WARNING:
WARNING:
remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer's label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be
provided only by a qualified service technician.
https://dl.ubnt.com/qsg/USW-Industrial/USW-Industrial_EN.html
USW-Industrial Quick Start Guide
USW-Industrial
USW-Industrial Quick Start Guide
Failure to provide proper ventilation may cause fire hazard. Keep at
To reduce the risk of fire or electric shock, do not expose this product to
Do not use this product in location that can be submerged by water.
Avoid using this product during an electrical storm. There may be a
100 - 240 VAC, 50/60 Hz Universal Input
AC/DC, Internal, 450W DC
AC Input: 100 to 240VAC, Max. 6A
PoE, Speed/Link/Activity
Air: ± 24 kV, Contact: ± 24 kV
ETSI300-019-1.4 Standard
-40 to 50° C (-40 to 122° F)
-40 to 60° C (-40 to 140° F)
5 to 95% Noncondensing
20W
Status
CE, FCC, IC
9/11