Rack Mounting; Installation Of Dabk-3101 Memory Board (Option) - Sony CDP-3100 Maintenance Manual

1-6. RACK MOUNTING
Use mount boards above 3U.
e Shelf:RHS-1238SL-BO
Procedure
1. Bore holes in the mount board according to the mount
pitch of the CDP-3100 shown in the figure.
Screws (+ PSW 3 x 8)
Screws (+ PSW3x8) €
Screw length
1-4 (E)
1-7. INSTALLATION OF DABK-3101 MEMORY
BOARD (OPTION) —
Always turn off the power switch before installing DABK-
3101. :
Adjustments need not be carried out after it is installed.
Procedure
1. Place CDP-3100 upside down so that its bottom faces up.
2. Remove the screws shown in the figure and remove the
hold plate.
Screw (+ PSW 3 x 8)
Hold plate
3. Insert DABK-3101 into the connector of the AU-183 board
as shown in the figure.
4. Adjust the projection of DABK-3101 to the hole of the hold
plate and secure with the screws. |
Hold plate
CDP-3-100