Options / Accessories; Drive Roll Kits; Alternative Magnum Gmaw Gun And Cable Assemblies; Magnum Gun Connection Kit (Optional K466-6 - Lincoln Electric Power MIG 360MP Operator's Manual

®
POWER MIG 360MP

OPTIONS / ACCESSORIES

DRIVE ROLL KITS

Refer to Table C.1 for various drive roll kits that are available for
®
the POWER MIG 360MP.The item in Bold is supplied standard
®
with the POWER MIG 360MP.
TABLE C.1
Wire Wire Size
Solid Steel .023"-.030" (0.6-0.8 mm)
.035" (0.9 mm)
.045" (1.1 mm)
.035"-.045" (0.9-1.1mm)
.040" (1.0mm)
Cored .035" (0.9 mm)
.045" (1.1 mm)
Aluminum 3/64" (1.2 mm)
.035" (0.9 mm)
K3675-1 Canvas Cover
K1738-1 Spool Gun Holder for POWER MIG
storage of spool gun cable, and gas hose for POWER MIG
provide hardware for routing gas inside POWER MIG
a Prince XL gun. (Note: included in K1809-1 and K2310-1)
K468 Spindle Adapter - for 8" (203.2mm) O.D. spool.
K363P READI-REEL™ ADAPTER - The K363P Readi-Reel Adapter
mounts to the 2" spindle. It is needed to mount the 22-30 lb.
Readi-Reels.
K435 Spindle Adapter for 14 lbs. coils - the K435 spindle adapter
allows 14lbs. (6kg.) Innershield coils to be mounted on 2" (51mm)
O.D. spindle.
K3676-1 Dual Cylinder
K4493-1 36VDC Power Supply - Used to power machine off of
120V input in order to display demo mode. To power the machine
via the external power supply, connect the power supply the the 4-
pin connector located on the front of the machine then plug in the
power supply.
ALTERNATIVE MAGNUM GMAW GUN AND CABLE
ASSEMBLIES
The following Magnum
separately available for use with the POWER MIG
rated 200 amps 60% duty cycle (or 250 amps 40% duty) and is
equipped with the integrated connector, twist-lock trigger
connector, fixed nozzle and insulator, and includes a liner,
diffuser, and contact tips for the wire sizes specified:
Drive Roll Kit
KP1696-030S
KP1696-035S
KP1696-045S
1
Optional liners for different wire diameters are sold separately,
KP1696-1
see table D.1 Maintenance Section.
KP1696-2
20' and 25' Magnum
KP1697-035C
K2951-3 Magnum
KP1697-045C
K2951-4 Magnum
KP1695-3/64A * Requires K466-6 adapter and KP44-3545-25 liner
KP1695-035A

MAGNUM GUN CONNECTION KIT (OPTIONAL K466-6)

Using the optional K466-6 Magnum
POWER MIG permits use of standard Magnum
®
gun and cable assemblies.
- provide neat
®
. Also
®
when using

SPOOL GUN

Remove all input power to the POWER MIG
proceeding.
The POWER MIG
the Spool Gun (with remote speed control).
It also provides gun trigger switch transfer between the machine's
use with its feeder gun or the spool gun for same polarity welding
with different wire and gas processes.
K2490-1 Magnum
K487-25 Magnum
K2445-1 Magnum
the K487-25 Magnum
connect to the POWER MIG
cable receptacle.
C-1
®
PRO 250L gun and cable assembly is
Length Part No. English Wire
Size
15' (4.6 m) K3081-2 .035 – .045" 0.9 – 1.2 mm
®
PRO Curve 300 Guns -
®
PRO Curve 300, 20'*
®
PRO Curve 300, 25'*
®
WARNING
®
360MP provides direct connection and use of
®
250LX
®
SG Spool Gun (requires K2445-1 Cable
Adapter)
®
SG Spool gun Control Cable Adapter. Allows
®
SG spool gun's 6-pin control cable plug to
®
360MP's 7-pin spool gun control
ACCESSORIES
®
360MP. Each is
Metric Wire
1
Size
Connection kit for the
®
200, 300 or 400
®
360MP before