Connection To An Audio System - Sylvania HDRV200F Quick Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
AUDIO OUT
Connections

Connection to an Audio System

Analog audio
input jacks
HDD/DVD/VCR
AUDIO OUT
L
R
or
HDD/DVD
AUDIO
OUT
L
R
Method 2
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
Digital Coaxial
cable
(commercially
available)
DIGITAL
AUDIO OUT
Setting
Connection
If output is Dolby Digital encod-
ed audio, connect to a Dolby
Digital decoder.
Unless connected to a Dolby
Digital decoder.
Connecting to an MD deck or
DAT deck.
* To complete these settings. (See pages 115–116.)
Note
• By connecting this unit to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital 5.1 channel surround sound as heard in the
movie theaters.
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
Digital audio
input jack
HDD/DVD
DIGITAL
AUDIO OUT
COAXIAL
Initial Setup >Playback >Audio Out >
PCM Dolby Digital
- Stream
- PCM
- PCM
19