Connection To An Audio System - Sylvania DVR91VG Owner's Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
<REAR PANEL>
AUDIO OUT
Note
• Playing back a DVD using incorrect settings
may generate noise distortion and may also
damage the speakers.
16
EN
Connections

Connection to an Audio System

XXXX
Analog audio
input jacks
DVD/VCR
IN - AUDIO - OUT
L
R
or
DVD
If output is Dolby Digital
AUDIO
OUT
encoded audio, connect to a
Dolby Digital decoder.
L
Unless connected to a Dolby
R
Digital decoder.
Connecting to an MD deck or
DAT deck.
Note
• By connecting this unit to a Multi-channel Dolby Digital
• The audio source on a disc in a Dolby Digital Multi-
• Playing back a DVD using incorrect settings may
Method 2
Dolby Digital decoder, MD
deck or DAT deck
Audio Coaxial Digital cable
(commercially available)
DIGITAL
AUDIO OUT
Setting
Connection
* To complete these settings, refer to pages 71-7.
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
generate noise distortion and may also damage the
speakers.
Digital audio
COAXIAL
input jack
DVD
DIGITAL
AUDIO OUT
COAXIAL
Setup >Playback >Audio >Digital Out >
PCM Dolby Digital
- Stream
PCM
-
PCM
-