Table of Contents
Advertisement
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some
simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
General Operation
Error message
Error
Now Recording.
Error
Now Dubbing.
Error
Timer program starts soon.
Discs
Error message
Disc Error
Region Error
Please eject the disc.
Playback is not authorized
in your region.
Error
Please insert a valid disc.
Error
Cannot format.
Error
Cannot finalize.
Error
Un-finalize cannot be performed.
Error
Disc protect cannot be performed.
Timer Recording / Recording & Navigator
Error message
Error
Prohibited timer program.
Error
Cannot register timer program.
128
Others
Troubleshooting
Cause & Solution
• The operation is not available.
• The operation is not available during recording.
• The operation is not available during dubbing.
• The operation is not available since a Timer Recording will start soon.
Cause & Solution
• Invalid disc is inserted. Please insert a disc supported by this unit.
(See pages 29 and 66.)
• A disc with the invalid region code is inserted.
This unit only supports the discs with region code 1 or ALL.
• No disc or an invalid disc is inserted. Please insert a disc supported
by this unit. (See pages 29 and 66.)
• The discs not supported by this unit cannot be formatted.
Please use the discs supported by this unit. (See page 29.)
• During HDD playback or recording, formatting will not be executed.
Stop the playback or recording.
• The discs not supported by this unit cannot be finalized.
Please use the discs supported by this unit. (See page 29.)
• The finalization of the Video mode DVD discs made on other unit
cannot be undone.
• Disc Protect is only available with the VR mode DVD-RW discs.
Other discs cannot be protedcted. (See page 62.)
Cause & Solution
• The entry for the Timer Recording is invalid. The recording duration must
be in 24 hour period. The end time must be later than the present time,
and the start time must be before 1-1-2055. Re-program the Timer
Recording correctly. (See pages 42-43.)
• The maximum number of timer programs is exceeded.
Delete unnecessary timer programs. (See pages 42-43.)
Advertisement
Table of Contents
