To reduce the risk of fire, electric shock or injury to persons, To reduce the risk of fire, electric shock or injury to persons, use this flexible light only with American Lighting recommended make sure that the electrical power to the fixture is drivers, controllers, power connectors, jumpers and extensions.
Page 4
This mode of operation requires the use of RGB-H2-CTRL, RGB-H2-XLR3-PT, and an external DMX master controller (both sold separately). RGB- H2-CTRL is rated for the following: 100-240V AC input, 3x 1.66A output current, -20°C - 50°C, and is designed for use with RGB-H2 series only.
Page 5
3 channels. 7. For single zone operation, (1 or more Radio Frequency controllers controlling 1 or more sets of RGB-H2 series synchronously), utilize address 001. For multiple zone operation, (multiple Radio Frequency controllers controlling multiple sets of RGB-H2 individually), set the addresses in multiples of 4 (e.g.
Need help?
Do you have a question about the RGB-H2 Series and is the answer not in the manual?
Questions and answers