Additional Information - Sony UBP-X700 Troubleshooting Manual

Settings

Verify the setting of Dolby Vision Output to ON on your Blu-ray player.
1. Press the HOME button on the remote control.
2. Select Screen Settings.
3. Set the Dolby Vision Output Setting to ON.
NOTE: There is no "Auto" setting and the default setting of Dolby Vision Output is
OFF.

Verify that the HDMI setting for the HDMI jack on your TV corresponds to HDR.
o For Sony BRAVIA TVs:
1. Press the HOME button on the remote control.
2. Select Settings.
3. Select External inputs in the TV category.
4. Select HDMI signal format and set to Enhanced Format.
o For other TV's, please refer to your TV's instruction manual for this setting.

Additional Information


When the Dolby Vision Output Setting is turned ON, the Video Settings and 3D
Playback function will become unavailable.

Content corresponding to Dolby Vision is output with HDR10 when Dolby Vision Output is set to
OFF (Default Setting).

When Dolby Vision is enabled, all content (included non-Dolby Vision encoded material such as
HD Blu-ray Disc or non-HDR streaming content) will be played using Dolby Vision output. Please
refer to the table below:
Dolby Vision Output Specifications
Dolby
Vision
Content
Output
Setting
Dolby Vision
Dolby
Vision:
HDR10 (High
ON
Dynamic Range)
UHD (4K) / HDR TV
UHD (4K) / HDR
NOT
TV corresponding
corresponding to
to Dolby Vision
Dolby Vision
Dolby Vision
HDR 10 Output
Output
SDR TV
SDR Output
converted
from HDR to
SDR