Additional Information; Troubleshooting - Sony UHP-H1 Operating Instructions Manual

Hide thumbs Also See for UHP-H1:
Table of Contents

Advertisement

Additional Information

Troubleshooting

If you experience any of the following
difficulties while using the player, use
this troubleshooting guide to help
remedy the problem before requesting
repairs. Should any problem persist,
consult your nearest Sony dealer.
Picture
There is no picture or the picture is
not output correctly.
, Check that all the connecting cables
are securely connected (page 16).
, Switch the input selector on your TV
to display the signal from the player.
, Reset the [Output Video Resolution] to
the lowest resolution by pressing
x STOP, HOME, and then POP UP/
MENU button on the remote.
, Try the following:
off and on again.
equipment off and on again.
Disconnect and then reconnect the
3
HDMI cable.
, The HDMI OUT jack is connected to a
DVI device that does not support
copyright protection technology.
, Check the [Output Video Resolution]
settings in [Screen Settings] (page 28).
, For BD-ROMs/DVD-ROMs/Data
content/Network content, check the
[24p Output] settings in [Screen
Settings] (page 28).
36
Turn the player
1
Turn the connected
2
The display language on the screen
switches automatically when
connected to the HDMI OUT jack.
, When [Control for HDMI] in [HDMI
Settings] is set to [On] (page 33), the
display language on the screen
automatically switches according to
the language setting of the connected
TV (if you change the setting on your
TV, etc.).
Sound
There is no sound or the sound is not
output correctly.
, Check that all the connecting cables
are securely connected (page 16).
, Switch the input selector on your AV
amplifier (receiver) so that the audio
signals of the player are output from
your AV amplifier (receiver).
, If the audio signal does not come
through the DIGITAL OUT
(OPTICAL/COAXIAL)/HDMI OUT
jack, check the audio settings
(page 29).
, For HDMI connections, try the
following:
Turn the player off and
1
on again.
Turn the connected
2
equipment off and on again.
Disconnect and then reconnect the
3
HDMI cable.
, For HDMI connections, if the player is
connected to a TV through an AV
amplifier (receiver), try connecting the
HDMI cable directly to the TV. Refer
also to the instruction manual supplied
with the AV amplifier (receiver).

Advertisement

Table of Contents
loading

Table of Contents