Table of Contents
Advertisement
2
Commissioning
2.1
Unpacking the SIMATIC Rack PC IL
Unpack your Rack PC IL as follows:
1. Remove the packing.
2. Do not throw the original packing away. Keep it in case you have to transport
the unit again sometime in the future.
3. Please keep the documentation in a safe place. It is required during the initial
start up and is part of the device.
4. Check the packing and its contents for any shipping or transport damage
5. Check with the delivery note to make sure no components are missing. Also
check the accessory parts, which you can order separately.
6. Please inform your local dealer of any shipping or transport damages and of
outstanding items indicated on the delivery note.
Recording the Serial Number and the Ethernet address
7. Enter the serial number and the Ethernet address of your PC in the table
below. You can find the serial number on the type label attached to the rear of
the device. The Ethernet address can be found in the BIOS setup under Info
(key F1) > LAN Address.
The device can precisely be identified with the help of these numbers in case
of repairs or theft.
Enter the Microsoft Windows "Product Key" from the "Certificate of Authenticity"
8. Enter the Microsoft Windows "Product Key" from the "Certificate of
Authenticity" (COA) in the table. The product key is on the back of the device.
F-No.
Order No.
Microsoft Windows Product Key
Ethernet Address
SIMATIC Rack PC IL 40, Getting Started
A5E00171493-02
2-1
Advertisement
Table of Contents
