Radio Function; Radio Function Operation; Setting The Reception Area; Tuning Into A Station - Blaupunkt Osaka 760 Operating Instructions Manual

Radio Function

Radio Function

Radio Function Operation

Touch the icon [Radio} in the main interface to enter
the Radio interface. This will launch the radio and play
the last played radio station.
Radio Icon

Setting the reception area

This car audio system is designed for operation in
different regions with different frequency ranges and
station technologies. The factory default of the
reception area is 'INDIA' . If you operate the car audio
system in Asia, you may leave the setting to 'INDIA' or
set a suitable reception area on the menu:
On the home page, press the (System Settings) icon.
Ÿ
The settings menu is displayed.
At the top left area of the Settings menu. Touch the
Ÿ
(General) soft key.
Select the 'Radio' option
Ÿ
The current setting is displayed as 'INDIA' region.
Ÿ
07
You can leave it at the current setting
Select on the Radio region button to display the list
Ÿ
of available reception areas.
Select the desired reception area by double-
Ÿ
clicking.
The list is hidden, the selected reception area is set.
Ÿ
The main menu is displayed again.
Ÿ

Tuning into a station

Brie y press the
Ÿ
to change the frequency in Increments.
You can select broadcast frequency directly by
Ÿ
touch and drag on the frequency bar.
The frequency selected is played back on the radio.
Ÿ
Press the button for approx. 2 seconds to start
Ÿ
station seek tuning.
The radio tunes into the next receivable station.
Ÿ
Note: In the FM waveband, only traffic information
stations are tuned into if the priority for traffic
information feature is switched on - Not Applicable.
Storing stations manually
Select the desired memory bank with the
Ÿ
key.
Set the desired station.
Ÿ
Press & drag the frequency seek bar
Ÿ
to store the current station at the bottom.
The station is stored & can be switched by selecting
Ÿ
the desired station.
With this device, you can automatically search for and
store 10 FM & 10 AM stations offering the strongest
reception in the region in the current memory bank.
Any previously stored stations in this memory bank are
deleted in the process.
To browse the saved station touch the PRESET
Ÿ
soft key to see the saved stations
Touch the FM AM button to switch from FM to AM
Ÿ
reception

Scanning stations

You can use the scan function to play all the receivable
stations of the current wave band for a few seconds.
Long press the soft key. The seek tuning searches
for stations In the current waveband. Each receivable
station is played for a few seconds in the process.
Band Switch
Touch the FM AM band icon to switch the radio bands
among FM / AM radio reception.
button once or several times
soft