Radio Mode; Start Radio Mode; Select Memory Bank; Tune Into A Station - Blaupunkt HONG KONG 650 Operating Instructions Manual

Radio mode

Start radio mode

E In the main menu, press the [Radio] button.
The radio page menu is displayed.

Select memory bank

Different memory banks and wave bands are available.
Up to 6 stations can be stored in each memory bank.
E
Press the [ ] button repeatedly until the desired
memory bank is displayed.
FM1gFM2 gFM3 gAM1g AM2 g FM1
Tuning into a station
Tuning into stations manually
E
Brie y press the [
several times to change the frequency in
increments.
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
E
Press the [————] button to display additional
operating options.
E
Press the [ ] button.
A numeric keypad is displayed for the frequency
input.
E
Enter the frequency of the desired station with the
numeric keypad.
E
Press the [ OK ] button.
The radio playback menu is displayed, the station
of the frequency entered is played back.
Starting station seek tuning
9
E
Press the [ ] or [
seconds to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM wave
band, only traffic information stations are tuned
into if the priority for traffic information feature is
8
switched on.
] or [ ] button once or
9
] button for approx. 2
Storing stations manually
Select the desired memory bank with the [
E
button.
E Set the desired station.
Press one of the memory buttons [P1]-[P6] for
E
approx. 2 seconds to store the current station at
the button.
The station is stored.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store 6 FM stations offering the strongest reception in
the region in the current memory bank. Any previously
stored stations in this memory bank are deleted in the
process.
Select a memory bank.
E
E Press the [————] button to display additional
operating options.
E Press the [ TS ] button.
The tuner starts automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously
selected memory bank.
Note:
For Europe reception area: If traffic information is
switched-on, only traffic information stations are
stored.
Scanning stations
You can use the scan function to play all the receivable
stations of the current waveband for a few seconds.
E Press the [ ] button.
The seek tuning searches for stations in the
current waveband. Each receivable station is
played for a few seconds in the process.
E Pressing the [ ] button again selects the currently
scanned station and plays it back.
Switching RDS on/off
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme in the
Europe reception area that allows additional functions,
such as the display of the station name.
E Press the [————] button to display additional
operating options.
Press the [RDS] button to switch the RDS function
E
on or off.
If the RDS function is switched on, RDS is
E
displayed in white.
E Press the [ ] button to hide the additional
operating options, or wait until they are
automatically hidden.
]