Radio Function; Radio Function Operation; Tuning Into A Station; Storing Stations Manually - Blaupunkt Key Largo 970 Operating Instructions Manual

Radio function

Radio function operation

Touch the icon [Radio] in the main interface to enter
the Radio interface.

Tuning Into a station

Brie y press the 7 8 button once or several times
Ÿ
to change the frequency in Increments.
You can select broadcast frequency directly by
Ÿ
dragging the blue ( I ) in the frequency.
The frequency selected is played back on the radio.
Ÿ
Press the 7 8 button for approx. 2 seconds to start
Ÿ
station seek tuning.
The radio tunes into the next receivable station.
Ÿ
Note: For the reception area Europe: In the FM
waveband, only traffic information (TA) stations are
tuned into if the priority for traffic information feature
is switched on.
Radio Icon

Storing stations manually

Select the desired Memory Bank with the FM/AM
Ÿ
button – FM1 / FM2 / FM3 / AM1 / Am2
Set the desired station.
Ÿ
Press one of the memory buttons for approx. 2
Ÿ
seconds to store the current station at the button.
The station is stored and can be switched by
Ÿ
selecting the desired station.
With this device, you can automatically search for and
store 6 FM stations offering the strongest reception in
the region in the current memory bank. Any previously
stored stations in this memory bank are deleted In the
process.

Scanning stations

You can use the scan function to play all the receivable
stations of the current wave band for a few seconds.
Long press the 7 8 button. The seek tuning searches
for stations In the current waveband. Each receivable
station is played for a few seconds in the process.

Band Switch

Touch the band icon
among FM1/FM2/FM3/AM1/AM2.

Tune and Seek

Short press the icon 7 8 to tune point by point; Long
press the icon 7 8 to seek manually; It will stop
seeking when a station sought.

Auto Seek and Store stations

Long-press the icon L to auto seek, and auto store the
turned stations. During seek, tap the icon L again to
stop seeking.
18 stations will be stored in FM band (6 stations in
each FM1 / FM2 / FM3 each memory band); 12
stations will be stored in AM band (6 stations in
AM1 / AM2 each band). The system will stop
seeking after one cycle of seek.
Start radio mode
Ÿ

Select memory bank

Ÿ
Tune Into a station
Ÿ
Select memory bank
On the home screen, your will nd the 'Radio' icon.
Touch the 'Radio' icon to enjoy the radio on the go.
Different memory banks and wave bands are available
Up to 6 stations can be stored in each memory bank.
FM1+FM2+FM3/AM1+AM2. Press the
repeatedly until the desired memory bank is displayed.
Radio
to switch the radio bands
button
07