Cpu Installation Procedure - ECS 915P-A Manual

14

CPU Installation Procedure

The following illustration shows CPU installation components.
A. Unload the cap
· Use thumb & forefinger to hold the
· Lift the cap up and remove the cap
B. Open the load plate
· Use thumb & forefinger to hold the
· Lift up the lever.
· Use thumb to open the load plate. Be
C. Install the CPU on the socket
· Orientate CPU package to the socket.
D. Close the load plate
· Slightly push down the load plate onto the
· CPU is locked completely.
E. Apply thermal grease on top of the CPU.
F. Fasten the cooling fan supporting base onto
the CPU socket on the motherboard.
G. Make sure the CPU fan is plugged to the
CPU fan connector. Please refer to the CPU
cooling fan user's manual for more detail
installation procedure.
To achieve better airflow rates and heat dissipation, we suggest that you use
a high quality fan with 3800 rpm at least. CPU fan and heatsink installa-
tion procedures may vary with the type of CPU fan/heatsink supplied. The
form and size of fan/heatsink may also vary.
lifting tab of the cap.
completely from the socket.
hook of the lever, pushing down and pulling
aside unlock it.
careful not to touch the contacts.
Make sure you match triangle marker
to pin 1 location.
tongue side, and hook the lever.
Installing the Motherboard