Swisher LS934, LS622, LS826, LS10534D Owner's Manual page 11

Log Splitter V-Belt Replacement
• Caution! : The Idler System is spring loaded. When replacing belt, be
sure to lock lever to avoid accidental release.
Remove the (6) self-tapping screws that hold the belt cover on the
•
bottom of the unit and remove the cover to allow access to the belt. Pull
clutch lever out to remove load from belt. Wedge a flat screwdriver (or
something similar) into the slot to prevent release. See fig.1
• Remove old belt.
Fig. 2
Fig.1