Explanation Of Symbols; Safety Instructions - BASETech BS-10AN Operating Instructions Manual

Operating instructions
"BS-10AN" Anemometer
Item no. 1499801
Intended Use
With this product, the air current velocity and the temperature of that air current can be meas-
ured. The maximum, average, and current air current velocity can be measured. The air cur-
rent velocity can be shown in five different measurement units on the display. Additionally, you
can switch between the temperature display in °C or in °F.
For safety and licensing reasons (CE), unauthorised conversion and/or modification of the
product is not permitted. Any other use that described above is not permitted. It may lead to
damage to the product. Moreover, this involves dangers, e.g., short-circuit, fire, electric shock
etc.. Read the operating instructions carefully and keep them for later reference.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Anemometer
• Hand strap
• Battery (type CR2032)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the websit

Explanation of symbols

The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
This symbol indicates specific risks associated with handling, operation or use.
The arrow symbol indicates special tips and operating information.

Safety Instructions

Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material damag-
es resulting from failure to observe the safety instructions and the information
in these operating instructions regarding the proper handling of the product.
Furthermore, in such cases, the warranty/guarantee will be null and void.
• Unauthorised conversion and/or modification of the product is not allowed for
safety and approval reasons (CE).
• The product is not a toy. Children are not aware of the potential dangers involved
when using electrical devices.
• When the product is brought from a cold into a warm room (e.g., during transport),
condensation water may form. Wait until the product has reached room tempera-
ture first, before use.
• Only operate the product using the supplied battery or another, similar model.
Please replace empty batteries with new ones to avoid damages due to wrong
measurement values.
• Do not leave packing materials unattended. It may become a dangerous plaything
for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Do not leave batteries/rechargeable batteries lying around; they could be swal-
lowed by children or pets. If swallowed, consult a doctor immediately. Danger
to life!
• Acid contact due to leaking or damaged single/rechargeable batteries can burn
your skin, therefore use suitable protective gloves.
• Batteries (non-storage) must not be recharged. There is risk of explosion when the
battery is used or inserted into the Anemometer improperly. The supplied battery
should only be replaced with a battery of the same type or a similar product. Never
expose the battery to strong heat.
• On industrial sites, the accident prevention regulations of the association of the
industrial workers' society for electrical equipment and utilities must be followed.
• Do not carelessly leave the packaging material lying around, since it could be-
come a dangerous plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or accidental
drops, even from a low height.
• For the environmentally friendly disposal of batteries/rechargeable batteries,
please observe the chapter "Disposal".
• The device must only be repaired by a specialist or in a specialist workshop.
Functions
The anemometer has the following functions:
• Measurement of air current velocity and of temperature
• Measurement of the maximum/average/current (max, avg, cu) air current velocity
• Choice of the temperature unit °C/°F
• Choice of units of air current velocity
m/s, km/h, feet per minute (ft/min), knots, miles per hour (mph)
• Beaufort scale (classification of wind force from 1 to 12)
• Background lighting of the display
• Automatic and manual switch-off of the device
• Display of wind chill (from the difference between the measured air temperature and the felt
temperature due to the wind velocity).
• Battery indicator
LC Display
1 Beaufort scale
2 Air current velocity
3 Unit of the air current velocity
4 Wind chill
5 Temperature unit
6 Temperature (Indicator "CU" during
setting-up)
7 average air current velocity
8 maximum air current velocity
9 Battery status