Technical Data; Operation - Proxxon BS/E Manual

Translation of the Original Operating
GB
Instructions PROXXON - BS/E
WARNING!
Read all safety warnings and instructions!
Failure to follow all safety warnings and instruc-
tions listed below may result in electric shock, fire and/or
serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
THE FUTURE !
Attention:
Hold power tool by insulated gripping surfaces only,
when performing an operation where the cutting acces-
sory may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
Legend
1. Speed regulator knob
2. ON - OFF switch
3. Unit hoop
4. Connection cable
5. Adapter for dust extraction
6. Drive roller
7. Tensioning bar
8. Tensioning roller
9. Grinding belt
10. Adjusting screw for belt run
11. Retaining knob
Scope of delivery
1 pc. Belt sander BS/E
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Fan sander K 80
2 pcs. Fan sander K 180
Description of the machine
The PROXXON band grinder BS/E
is a light, compact and user-friendly unit.
It can be used in modelling, tool manufacture and mould
manufacture, but also in repair work on motor vehicles.
The unit enables metal, plastic and wood to be processed.
It can be used for regrinding moulds, grinding small apertu-
res and for polishing.
It can additionally be used for deburring and breaking edges,
removing paint and finely grinding surfaces.
Turning is carried out via a maintenance-free mitre gear.
The grinding belt is driven by a robust aluminium drum
which is equipped with a double-bearing.
The tensioning roller is also equipped with ball bearings.
The grinding head may be swivelled, so that work in awk-
ward places is also possible.

Technical data

Dimensions, weight:
Length
Weight
Grinding belt length
Head can be rotated by
Motor:
Voltage:
Power consumption:
hort-term operation:
Belt speed:
Noise generated:
General measuring uncertainty
Vibration at handle:
Please note that the sound and vibration measurements in
particular have been performed with Proxxon bits and cut-
ters. When using third-party brands we cannot guarantee
compliance with the statements given here!
For use in dry environments only
Protection class II device
Please do not dispose off
the machine!
For your safety, always wear hearing protec-
tion while working!
Risk of injury!
Never work without dust protection
mask and safety glasses. Some dusts
have a hazardous effect! Materials con-
taining asbestos may not be machined!

Operation

Working with the unit.
Attention!
Provide a secure fixation of the workpiece! Workpiece should
be clamped with a suitable device. So the ejection of the
workpiece is prevented.
approx. 330 mm
approx. 650 g
330 x 10 mm
60°
230 V, 50/60 Hz
80 W
KB 5 min
225 bis 450 rpm
LPA: 90dB(A)
LWA: 103 dB(A)
K=3 dB
2.5 m/sec 2
- 7 -