Table of Contents
Advertisement
English
Features
This appliance includes some or all of the following
features (fig. A).
1. Motor housing
2. Swivel head
3. On/Off switch & speed control
4. Pulse control
5. Swivel head release button
6. Blade storage
7. Foot
8. Bowl
9. Bowl lid
10. Lid seal
11. Bowl pusher
12. Upper chopping blade
13. Lower chopping blade
14. Dough blade
15. Whisk
16. Chopping blade spindle
17. Blade carrier
18. Thin slicing blade
19. Thick slicing blade
20. Thin shredding blade
21. Thick shredding blade
22. Parmesan blade
23. French fries blade – small
24. French fries blade carrier
25. French fries blade – large
26. Spatula
27. Jug
28. Lower jug blade
29. Upper jug blade
30. Jug lid
31. Jug lid cap
32. Jug seal
33. Juice extractor
34. Juice extractor lid
35. Juice extractor pusher
Assembly
This appliance requires some assembly to complete
the required task. Please refer to the relevant
section for particular assembly details.
All parts should be cleaned before use. See
"Cleaning" for details.
Use
As a Food Processor
• Carefully fit the lower chopping blade (13) over
the chopping blade spindle (16) then fit the upper
chopping blade (12) onto the lower blade,
rotating the blades in a clockwise direction so
they lock together and onto the spindle.
Note: The blades should be at right-angles to
each other, forming an X-shape.
• Remove the bowl lid (9), fit the spindle & blades
onto the metal pin in the centre of the bowl then
re-fit the bowl lid, making sure the lid seal (10) is
in place.
• Ingredients can be added to the bowl while the lid
is off, or through the chute in the lid using the
bowl pusher (11) provided.
• Fit the bowl pusher (11) into the inlet chute in the
lid. This should be left in place during use to
prevent spills.
• Press the swivel head release button (5), guiding
the swivel head (2) as it lifts.
Note: The swivel head cannot be raised if the
speed selector (3) is in any position other than
"OFF".
• Place the assembled bowl in the recess in the
motor housing (1).
• Rotate the swivel head back towards the motor
housing & push it down until it latches in place.
• Connect the appliance to a suitable electrical
supply.
• Rotate the speed control (3) to the desired speed
until the ingredients are chopped as required then
rotate the control back to 0 to turn the appliance
off.
• The pulse button (4) can be used instead of the
speed control.
• Press the swivel head release button (5), guiding
the swivel head (2) as it lifts.
• Lift the bowl from the appliance.
• Remove the bowl lid then carefully remove the
spindle & blades & transfer the ingredients to a
suitable container.
• The blades can be removed from the spindle
individually, rotating them in an anti-clockwise
direction.
-4-
Advertisement
Table of Contents
