Installation - Electrolux EWF7525DGWA User Manual

30 www.electrolux.com
11.

INSTALLATION

11.1 Positioning
It is important that your
washing machine stands firm
and level on the floor to ensure
correct operation.
That the appliance must not be
installed behind a lockable door, a
sliding door or a door with a hinge
on the opposite side to that of the
washing machine door is restricted.
Use a spirit level on the top and
side of the washing machine to
check the levels.
If you do not have a spirit level, as
a guide use the edge of a door
frame, cupboard or bench to
check that the washing machine
is level.
Loosen or tighten the feet to
adjust the level. A correct
adjustment of the appliance level
prevents the vibration, noise and
the movement of the appliance
when in operation.
When the washing machine is
levelled, try to rock it from corner
to corner. If it does rock, adjust the
legs again until it is levelled and
does not rock.
Never place cardboard, wood or
similar materials under the machine
to compensate for any unevenness
in the floor.
Install the machine on a flat hard
floor. Make sure that air circulation
around the machine is not
impeded by carpets, rugs etc.
Check that the machine does not
touch the wall or cupboard units.
11.2 Water Inlet
Connect the water inlet hose to a
tap with 3/4" BSP thread.
Use the hose supplied with the
washing machine. DO NOT USE
OLD HOSES.
The other end of the inlet hose
which connects to the machine
can be turned in any direction.
Simply loosen the fitting, rotate
the hose and retighten the fitting,
making sure there are no water
leaks.