Table Of Contents - Toro SGR-13 Original Instructions Manual

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is designed to grind and remove tree
stumps and surface roots. It is not intended to cut
rock or any other material other than wood and the
soil around a stump.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
1 illustrates the location of the model and serial
numbers on the product. Write the numbers in the
space provided.
© 2018-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Important:
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number plate
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
Safe Operating Practices.................................... 3
Safety and Instructional Decals .......................... 5
Product Overview ..................................................... 7
Controls ............................................................. 7
Specifications .................................................... 8
Attachments/Accessories ................................... 8
Figure Operation .................................................................. 8
Before You Start ................................................. 8
Adding Fuel ........................................................ 8
Performing Daily Maintenance.......................... 10
2
With your mobile device, you can
Figure 1
Figure 2
Contact us at www.Toro.com.
g254494
g000502
Printed in the USA
All Rights Reserved