Advertisement
INSTALLATION INSTRUCTIONS
IMPORTANT: READ ALL INSTRUCTIONS THOUROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF
ESSENTIALS SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.
RIGID STEM MOUNTING (PENDSS) – 2W MODEL ONLY
PREPARING TO INSTALL
1.
REFER TO GENERAL INSTRUCTIONS AT THE BEGINNING OF THIS SECTION.
2.
PENDSS BRACKET (PROVIDED BY FLS AND PACKAGED SEPARATELY) ACCEPTS 3/4" THREADED ROD.
3.
NEW PENDANT MOUNT: MEASURE SPACING BETWEEN BRACKETS – TRANSFER MEASUREMENT FROM FIXTURE TO MOUNTING SURFACE. THIS MEASUREMENT
IS HOW FAR APART THE NEW PENDANTS SHALL BE SPACED. BRACKETS ARE SPACED AT 17" O.C. FOR 2W
4.
FOR EXISTING PENDANT: ENSURE PENDANT SPACING MATCHES BRACKET LOCATION ON FIXTURE, FIG 15.
5.
REMOVE BRACKET AND OPERATORS FROM PACKAGING. (2 OPERATORS PROVIDED WITH EACH BRACKET).
6.
REMOVE MOUNTING TAB FROM FIXTURE HOUSING. ATTACH OPERATOR PIECE TO TAB. AND REINSTALL TAB, (4 TIMES), FIG 16.
7.
SECURELY ATTACH BRACKET TO THREADED ROD (STEMS AND FASTENERS PROVIDED BY OTHER).
8.
RAISE FIXTURE TO BRACKETS AND SNAP OPERATOR PIECE TO BRACKET, (4 TIMES), FIG 17.
9.
MAKE FINAL WIRING CONNECTIONS (REFER TO WIRING INSTRUCTIONS AT END OF THIS SECTION)
FIG. 15
FLEXLIGHTINGSOLUTIONS.COM
REV 082318
FIG. 16
Remove the bracket
from the fixture.
FIG. 17
LIGHTING.TECH@FLEXTRONICS.COM
HOSEDOWN SERIES
Place hanger into the
Reassemble back
slot and twist
onto the fixture
913.851.3000
Advertisement
