Advertisement
INSTALLATION INSTRUCTIONS
IMPORTANT: READ ALL INSTRUCTIONS THOUROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF
ESSENTIALS SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN DEATH, SERIOUS INJURY OR SIGNIFICANT PROPERTY DAMAGE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH APPLICABLE BUILDING AND ELECTRICAL CODES, BY A QUALIFIED PERSON WHO IS FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE
•
This product must be installed in accordance with the applicable
Installation code by a person familiar with operation of the
product and hazards involved.
•
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE
D'INSTALLATION PERTINENT, PAR UNE PERSONNE QUI
CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHÉRENTS INSTALLATION OR
ASSEMBLY INSTRUCTIONS
•
Fully inspect lens and housing of the fixture prior to
installation. If damaged, notify factory.
•
To avoid electric shock: disconnect electrical power (Line
Power) before and during installation and maintenance.
•
Verify supply voltage is same as rated fixture voltage. The
electrical ratings of the fixture are clearly indicated on the
product label.
•
Hosedown fixtures are suitable for dry, damp, and wet locations
only. Be cautious of any sharp edges. Wear proper safety gear
(such as gloves and safety glasses) while handling.
•
SUITABLE FOR WET LOCATIONS
• CONVIENT AUX EMPLACEMENTS MOUILLÉS (S24-L2)
THESE INSTRUCTIONS DO NOT ATTEMPT TO COVER ALL INSTALLATION AND MAINTENANCE SITUATIONS. FOR MORE INFORMATION OR QUESTIONS
REGARDING THE INSTALLATION OR USE OF THE HOSEDOWN FIXTURE, CALL 913-851-3000 OR EMAIL AT
MAINTENANCE
FIXTURES SHOULD BE DRY DUSTED PERIODICALLY. THE LENS CAN BE CLEANED WITH DAMP OR DRY CLOTH. NO SPECIAL CLEANER REQUIRED.
TROUBLESHOOTING
TURN ELECTRICITY OFF AT THE MAIN CIRCUIT BREAKER, PANELBOARD, FUSE BOX OR DISCONNECT. DO NOT ATTEMPT TO TROUBLESHOOT WITH THE
POWER ON.
ISSUE 1 - LIGHT DOES NOT COME ON
VERIFY THAT POWER IS BEING DELIVERED TO THE FIXTURE. CHECK ALL UPSTREAM CIRCUIT BREAKERS, FUSES AND DISCONNECT TO ENSURE
1.
THEY ARE ON AND IN PROPER WORKING ORDER.
CONFIRM ALL ELECTRICAL CONNECTIONS ARE COMPLETE AND CONTINUOUS.
2.
IF THE ISSUE REMAINS UNRESOLVED, CONTACT FLEX LIGHTING SOLUTIONS.
3.
ISSUE 2 - ONE OR MORE LEDS ARE OUT WHILE OTHERS REMAIN ON
DETERMINE IF REPLACEMENT IS DESIRED. AFTER ONE OR MORE LEDS FAILS, THE FIXTURE MAY CONTINUE TO OPERATE NORMALLY, ALTHOUGH
1.
WITH A REDUCED LUMEN OUTPUT.
IF REPLACEMENT FIXTURE IS DESIRED, CONTACT FLEX LIGHTING SOLUTIONS.
2.
WARRANTY SUPPORT
PHONE: +1 913-851-3000
EMAIL:
LIGHTING.TECH@FLEX.COM
FLEXLIGHTINGSOLUTIONS.COM
REV 082318
WARNING
:
PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
• Account for small parts and destroy packing material, as these
maybe hazardous to children.
•
ALL LATCHES MUST REMAIN IN PLACE IN ORDER TO
MAINTAIN RAIN TIGHT
•
BONDING IS NOT AUTOMATIC AND MUST BE
PROVIDED AS A PART OF THE INSTALLATION
•
For indoor and outdoor applications. Turn power
off before servicing—see instructions. Properly
ground fixture.
•
Ensure no bare wires are exposed outside the electrical
connections.
•
To prevent wiring damage or abrasion, do not expose wiring to internal
metal plate or other sharp objects.
Caution-Risk of fire
•
Minimum 90°C supply conductors.
•
Not intended for recessed installation in ceilings or soffits.
LIGHTING.TECH@FLEXTRONICS.COM
HOSEDOWN SERIES
Caution-Risk of electric shock
LIGHTING.TECH@FLEX.COM.
913.851.3000
Advertisement
