Advertisement
INSTALLATION INSTRUCTIONS
IMPORTANT: READ ALL INSTRUCTIONS THOUROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF
ESSENTIALS SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.
RIGID STEM MOUNTING (MLT) - 2N AND 4N MODELS ONLY
PREPARING TO INSTALL
1.
REFER TO GENERAL INSTRUCTIONS AT THE BEGINNING OF THIS SECTION.
2.
MLT BRACKET (PROVIDED BY FLS) ACCEPTS 1/4" THREADED ROD.
3.
REMOVE MOUNTING BRACKETS FROM FIXTURE HOUSING. REMOVE BAIL HOOK OR LAY BAIL HOOK TO ONE SIDE, FIG. 11.
4.
LOCATE EXISTING THREADED ROD (IF APPLICABLE) AND SECURELY ATTACH BRACKET TO THREADED ROD. IF THREADED ROD NOT PRESENT,
PROVIDE STEMS AND FASTENERS (NOT INCLUDED) AND SECURELY ATTACH BRACKET, FIG 12.
5.
BRACKETS SHOULD BE SPACED AT LEAST 18" O.C. FOR 2N MODEL, 36"O.C FOR 4N MODEL (IF POSSIBLE).
6.
ATTACH FIXTURE TO MOUNTING BRACKETS, FIG. 13.
7.
MAKE FINAL WIRING CONNECTIONS (REFER TO WIRING INSTRUCTIONS AT END OF THIS SECTION), FIG. 14.
FIG. 11
FLEXLIGHTINGSOLUTIONS.COM
REV 082318
FIG. 13
LIGHTING.TECH@FLEXTRONICS.COM
HOSEDOWN SERIES
FIG. 12
FIG. 14
913.851.3000
Advertisement
