The Magnetometer; Magnetometer Operation And Controls; The Probe - Bartington Mag-01H Operation Manual

4. The Magnetometer

4.1. Magnetometer Operation and Controls

See operation manual OM0382
the front and rear panel controls.

4.2. The Probe

7
Key to Figure 1
1. Enclosure lid
2. Enclosure gasket
3. Blanking plates
4. Enclosure
5. Mounting plate screws
The probe consists of a precision fluxgate magnetic field sensor mounted within a tube. A
joystick arrangement for trimming the alignment of the sensor relative to the tube is provided.
The probe is mounted on a pillar enclosed in a rugged housing, which fully protects it against
mechanical damage or potential misalignment. The probe and enclosure are individually
BARTINGTON INSTRUMENTS
for a description of the Mag-01H's operation, and a description of
10
9
8
Figure 1. Theodolite mounted Mag A probe assembly.
Page 9 of 32
1
2
3
5
6. Mounting plate
7. 5m cable to magnetometer
8. Enclosure mounting screws
9. Fluxgate Mag A probe
10. Probe mounting screws
3
4
6
OM2020/5