Identification On The Device - Flex ADL 30 Original Operating Instructions

Contents
Identification on the device ..................... 11
For your safety ....................................... 12
Overview ................................................ 13
Control panel .......................................... 14
Technical specifications ......................... 15
Instructions for use ................................. 15
Checking measurement precision .......... 16
Calibration .............................................. 16
Maintenance and care ............................ 17
Disposal information ............................... 17
Exemption from liability .......................... 18

Identification on the device

Laser radiation
Do not stare into beam.
Product of laser class 2; IEC 60825-1:2007;
Maximum output power ≤ 1 mW;
Wave length 635-665 nm.
CAUTION
Avoid exposure.
Laser radiation is emitted through
this aperture.
Laser classification
The device complies with laser class 2, based
on the standard IEC 60825-1/EN 60825.
The eye is protected by the lid closure reflex
if somebody accidentally glances into
the laser beam. However, this lid protection
reflex may be impaired by medication,
alcohol or drugs.
These devices may be used without further
protective measures if it can be ensured
that no optical instruments reduce the cross-
section of the beam.
Do not aim laser beam at people.
Electromagnetic compatibility
Even though the device satisfies the strict
requirements of the relevant directives,
the possibility cannot be excluded that
the device
- will disrupt other devices (e.g. aircraft
navigation systems) or
- will be disrupted by powerful radiation,
possibly resulting in a wrong operation.
In these cases or other uncertaintities,
check measurements should be carried out.
FLEX ADL 30/60/120
11