Instructions For Installers And Service Engineers Only - Wickes Aquatronic 4 Ultra Installation And Operating Instructions Manual

Aquatronic 4 Ultra electric shower

INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY

Instructions for installers and service engineers only
CLEANING THE INLET FILTER
Cleaning the inlet filter
Fig.
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by an installer or service engineer.
IMPORTANT: Before servicing, switch off both
the electricity supply and water supply at the
mains.
The inlet filter is situated in the side of the inlet
pipe (fig.  ).
G-003-A
To gain access to the filter, remove the trimplate
and then unscrew the retaining nut from the side
of the inlet pipe.
When cleaning the wire mesh filter, do not use a
sharp object, as it will cause damage. It is
preferable to use an old toothbrush or similar.
Filter
When refitting the filter Do not overtighten the
filter cap.
T00396
9