Table of Contents
Advertisement
^ Push hinge pin e up and out from
underneath.
The soft-close mechanism is now no
longer fixed to the appliance.
^ Remove panel a.
^ Slide soft-close mechanism bracket
f as far as it will go towards the
handle side of the door, and undo
screws g on the soft-close
mechanism.
^ Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
^ Then place it to one side.
Changing the door hinging
Removing the lower door
^ Close the lower door.
^ Pull the middle hinge pin i upwards
to remove it.
^ Carefully lift the lower door off and
place it to one side.
^ Pull cover j off.
^ Unscrew hinge plate k, rotate it by
180° and fit it on the opposite side.
^ Turn plastic cover h 180° and refit it
in the centre of hinge plate k.
^ Refit cover j on the opposite side.
77
Advertisement
Table of Contents
