Table of Contents
Advertisement
en Home Connect
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is the
simplest way to connect the appliance
to your home network.
Requirement: If your router has a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) automatically.
Press and hold Remote Start
1.
approx. 3 seconds.
a The display shows Aut .
Press Start / Reload .
2.
Press the WPS button on the router
3.
within the next 2 minutes.
Take note of the information in the
documents for your router.
flashes in the display.
a
a The appliance attempts to connect
to your WLAN home network.
a If the display shows and
permanently, the appliance is con-
nected to the home network.
If the display shows Err , the appli-
4.
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi) with
WPS function.
40
Connect your appliance to the Home
5.
Connect app. → Page 41
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) manually. The appliance quickly
sets up its own Wi-Fi network. You can
for
connect a mobile device to the WLAN
network and transfer the network in-
formation for the WLAN home network
(Wi-Fi) to your appliance.
Requirement: The Home Connect app
is open and you have logged on.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut .
Set the programme to position 2.
2.
→ "Overview of Home Connect set-
lights up
tings", Page 38
a The display shows SAP .
Press Start / Reload .
3.
a
a The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
Call up the Wi-Fi settings on the mo-
4.
bile device.
flashes in the display.
for
Advertisement
Table of Contents
