Table of Contents
Advertisement
Buttons
Below is an overview of the buttons and their setting options.
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→ "Programmes", Page 22.
Button
Start / Reload
varioSpeed
Select
- Ready In +
Temperature
Spin Speed
(mains switch)
Remote Start
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
Multiple selection
1–24 hours
– 90 °C
– 1400
¡ Switch on
¡ Switch off
¡ Activate
¡ Deactivate
¡ Open the Home Con-
nect menu
Familiarising yourself with your appliance en
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing programme.
Note: Energy consumption increases.
The washing result is not affected by this.
Select the type of stain.
The temperature, drum movement and soaking
time are all adjusted to suit the type of stain.
Set the programme end.
The programme duration is already included in the
set number of hours.
Once the programme has started, the programme
duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or activate
If
is selected, the water is not drained at the
end of the washing cycle and the spin cycle is deac-
tivated. The laundry remains in the water used for
rinsing.
Switch the appliance on or off.
If you briefly press the button, the appliance will be
enabled for remote start via the Home Connect app
If you press the button for approx. 3 seconds, the
Home Connect menu opens.
Notes
¡ For safety reasons, remote start cannot be activ-
ated if the door is open.
¡ Remote start is deactivated for safety reasons in
the following circumstances:
– Open the door.
– Press Start / Reload .
– Press Remote Start .
– Switch off the appliance.
– Following a power cut.
(Rinse Hold).
27
Advertisement
Table of Contents
