Home Connect Settings; Connecting The Appliance To A Wlan Home Network (Wi-Fi) With Wps Function - Siemens WM14XMH0EU User Manual And Installation Instructions

Hide thumbs Also See for WM14XMH0EU:
Table of Contents

Advertisement

¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 41
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 42
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is
the simplest way to connect the ap-
pliance to your home network.
Requirement: If your router has a
WPS function, you can connect the
appliance to your WLAN home net-
work (Wi-Fi) automatically.
Press and hold Remote Start ⁠
1.
for approx. 3 seconds.
a The display shows Aut.
Press Start/Reload
2.
Press the WPS button on the
3.
router within the next 2 minutes.
Take note of the information in the
documents for your router.
flashes in the display.
a
a The appliance attempts to connect
to your WLAN home network.
a If the display shows and
up permanently, the appliance is
connected to the home network.
If the display shows Err, the appli-
4.
ance is not connected to the home
network.
Check whether your appliance is
in range of your home network.
Reconnect the appliance to the
WLAN home network (Wi-Fi)
with WPS function.
Home Connect  en
.
lights
41

Advertisement

Table of Contents
loading

Table of Contents