en Installation and connection
1
Connect the water inlet hose to a tap
2.
(26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points are
tight.
Water outlet connection types
This information is intended to help you
to connect this appliance to the water
outlet.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
ATTENTION!
When draining, the water outlet hose is
subject to water pressure and may
come loose from the installed connec-
tion point.
Secure the water outlet hose against
▶
unintentional loosening.
16
2
¾˝
min.
10 mm
Drainage into a siphon.
Secure the connection
point with a (24–40
mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
elbow → Page 29.
Drainage into a plastic
pipe with rubber sleeve
or into a gully.
Fix and secure the wa-
ter outlet hose with an
elbow → Page 29.
Connecting the appliance to the
electricity supply
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Technical
data → Page 63.
Check the mains plug is inserted
2.
properly.
Aligning the appliance
In order to reduce noise and vibration
and to prevent the appliance from mov-
ing, align the appliance correctly.
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.