Electrical Connection - AEG S70170TK38 User Manual

Table of Contents

Advertisement

12. Remove and install the handle
opposite side.
13. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natu-
ral fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the near-
est After Sales Service Force. The After Sales Service specialist will carry out the reversi-
bility of the doors at your cost.

Electrical Connection

CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified
electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow:
1
Brown:
3
4) If foreseen
4)
on the
1
5
Installation
2
3
4
Earth
Live
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

S70176tk

Table of Contents