Installation; Positioning; Levelling; Location - AEG S70170TK38 User Manual

Table of Contents

Advertisement

INSTALLATION

WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the ap-
pliance before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but
for optimum performance install this appliance at a location where the ambient temper-
ature corresponds to the climate class indicated on the rating plate of the appliance:
Climate class
SN
N
ST
T

Levelling

When placing the appliance ensure that it
stands level. This can be achieved by two adjust-
able feet at the bottom in front (2). If necessary
adjust the feet by removing the spacer (1).

Location

The appliance should be installed well away
from sources of heat such as radiators, boilers,
direct sunlight etc. Ensure that air can circulate
freely around the back of the cabinet.To ensure
best performance, if the appliance is positioned
below an overhanging wall unit, the minimum
distance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally,
however, the appliance should not be positioned
below overhanging wall units. Accurate levelling
is ensured by one or more adjustable feet at the
base of the cabinet. If the cabinet is placed in a
corner and the side with the hinges facing the
wall, the distance between the wall and the cabinet must be at least 10 mm to allow the
door to open enough so that the shelves can be removed.
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
13
Installation
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

S70176tk

Table of Contents