Removing The Shelf Holders; Electrical Connection - AEG SK912007I User Manual

Climate class
N
ST
T

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Electrical Connection

CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified
electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
A
13
Installation
B
C