READ ALL INSTRUCTIONS Warnings Parts List CAREFULLY BEFORE ASSEMBLING Product Set Up AND USING THE SOFT CARRIER. Product Use Facing In KEEP INSTRUCTIONS Head Support FOR FUTURE USE Facing Out Back Carry Accessories Harness Covers Hood Cleaning and Maintenance CUDL™ instructions 2...
Regularly check that your child is comfortably and securely seated in the baby carrier, especially when using as a back carrier. To prevent hazards from falling, ensure that your child is securely positioned in the carrier. CUDL™ instructions CUDL™ instructions 6...
Parts List Make sure all parts are available before assembly. If any part is missing, please contact Nuna. No tools are required for assembly. Shoulder Buckle 13 Shoulder Adjustment Strap Shoulder Buckle Strap 14 Waist Band Removable Parts Shoulder Buckle...
- Secure the waist band behind your back, engaging the hook and loop to hold the band firmly in place. To remove the carrier, reverse the steps above. DO NOT remove the carrier while your child is in it. CUDL™ instructions CUDL™ instructions 12...
Page 9
Leg hole adjustments MUST be used for children less than 15 lb (7 kg) to decrease the size of the leg hole and prevent sliding without pinching or chafing your child's leg. CUDL™ instructions CUDL™ instructions 14...
Page 10
- Fold the long side underneath itself and secure the hook and loop along the length of the fabric. - Tuck in the corners. - Make sure the zipper on the short side is covered by the fabric. Both parts of the zipper should now be covered. CUDL™ instructions CUDL™ instructions 16...
- Use one hand to hold the carrier and your child against you, and use the other to secure the other side buckle. - Holding your child in the carrier with one hand, secure the shoulder buckles one at a time. CUDL™ instructions CUDL™ instructions 18...
Page 12
Allow room for your child's head movements and keep child's face free from obstructions. Your child should be positioned close to you, high on your body. Keep your child's face visible to you at all times. CUDL™ instructions CUDL™ instructions 20...
Adjust the straps around your child and check to make sure all buckles and snaps are secure. Allow room for your child's head movements and keep child's face free from obstructions. - To remove the head support, unzip it from the carrier. CUDL™ instructions CUDL™ instructions 22...
- Fold the head support down so your child's face will be above the top edge of the carrier. The carrier is now ready for you to secure your child. Follow the same steps for securement as Facing In mode (page 17), but face your child outward. CUDL™ instructions CUDL™ instructions 24...
- Still supporting your child, grab the shoulder strap with your left hand and pull it down over your shoulder. - Slightly lean forward and move your child onto your back. CUDL™ instructions CUDL™ instructions 26...
Page 16
- Make sure your child is comfortable and securely seated in the baby carrier. Adjust the straps around your child and check to make sure all buckles and snaps are secure. Allow room for your child's head movements and keep child's face free from obstructions. CUDL™ instructions CUDL™ instructions 28...
The front edge of the bib is laid over the shoulder buckle strap. - Attach the sides of the hook and loop. Make sure the bib is laying flat and is secure to the top edge of baby carrier. CUDL™ instructions CUDL™ instructions 30...
- Attach the hook and loop. Make sure the bottom edge of the harness cover is tucked behind the head support. - Repeat on the other side. When both harness covers are secure, attach both bottom head support buttons into the button holes on the head support. CUDL™ instructions CUDL™ instructions 32...
- Attach three snaps on the hood strap to the three snaps on the shoulder strap. Repeat for the other side. Make sure the hood is not covering your child's mouth or laying too tightly over their head. CUDL™ instructions CUDL™ instructions 34...
Need help?
Do you have a question about the Cudl and is the answer not in the manual?
Questions and answers