Getting Started; Get The Timex Familyconnect App - Timex FamilyConnect User Manual

CAUTION
When the LED indicator flashes Orange, the battery is not being charged. Make sure to connect the
watch properly to the charging dock.
The temperature of the watch and dock may increase while the battery is charging.
The required charging time may differ, depending on the battery level of the watch and the power
supply connected to the charging dock.
If the temperature of the watch is too high, it will automatically not power on. Additionally, if the
ambient temperature is too high, the watch may be automatically powered off for self-protection.

Getting Started

To facilitate watch activation, make sure that you are in an area for good cellular reception.
Once charged, remove the watch from the dock. The watch should be powered "On", and prompting
you with either of the first two screens below. Once you acknowledge the app download on the watch
by tapping "Next", the watch will display its QR code and phone number.
NOTE: If you need to refresh the watch display, press the Power ON button. If you do not go back to
the QR code screen, swipe to the "Info" screen shown above.

Get the Timex FamilyConnect App

Download and install the Timex FamilyConnect app on your phone.
System Requirements for the app: iOS 10 or higher; Android 6.0 or
higher.
4