Configure The Postamble; Configure Your Scanner With Easyset - Honeywell SF61 User Manual

Cordless scanner
Hide thumbs Also See for SF61:
Table of Contents

Advertisement

Japanese Windows
Czech Republic Windows
Hungarian 101-key

CONFIGURE THE POSTAMBLE

The default postamble is <CR> <LF>. For certain applications or when using your
scanner as an HID Bluetooth device, you may need to change this setting. Use the
following configuration barcodes to change the default postamble in your scanner.
More postamble options are available with EasySet or with your Honeywell computer
(see

Configure Your Scanner with EasySet

Honeywell Computer
in the present chapter).
Carriage Return + Line Feed (*)
Carriage Return
User's Guide | SF61 Cordless Scanner
CHAPTER 3 –
CONFIGURE THE SF61B CORDLESS SCANNER
Brazilian Portuguese Windows
Slovakian Windows
and
Configure Your Scanner from Your
CONFIGURE YOUR
SCANNER WITH
EASYSET
EasySet is Honeywell's Windows-based
scanner setup software application.
You can use EasySet to set up your
scanner product in two ways:
Online setup – send
configuration commands from
EasySet directly to your scanner.
Online setup via the SD62 base
station – send configuration
commands from EasySet to
the scanner via the SD62 base
station.
Offline setup – send
configuration commands to a
barcode setup sheet, print out
the setup sheet, and scan the
barcodes with your scanner.
If it is not already installed on your host
PC, download and install the latest
version of EasySet at this link on the
Honeywell website:
https://hsmftp.honeywell.com/
Navigate to Software >
Barcode Scanners > Software > Tools
and Utilities > EasySet
None
We recommend that you install EasySet
in the default location proposed by the
installer.
Enter
31

Advertisement

Table of Contents
loading

Table of Contents