Intended Use; Product Information - Viessmann Vitotrol 100 OT Installation And Service Instructions Manual

Intended use

The appliance is intended solely for
installation and operation in sealed
unvented heating systems that comply
with EN 12828, with due attention paid
to the associated installation, service
and operating instructions. It is only
designed for heating up heating water
that is of potable water quality.
Intended use presupposes that a fixed
installation in conjunction with permissi-
ble, system-specific components has
been carried out.
Commercial or industrial usage for a
purpose other than heating the building
or DHW shall be deemed inappropriate.

Product information

Room temperature controller
■ For room temperature-dependent
mode or weather-compensated mode
of the heat generator.
Weather-compensated mode in con-
junction with an outside temperature
sensor (separate accessories).
■ For controlling a heating circuit with-
out a mixer and/or a heating circuit
with a mixer in conjunction with the
OpenTherm mixer extension kit (sep-
arate accessories).
Room temperature-dependent mode
or weather-compensated mode in
conjunction with an outside tempera-
ture sensor (separate accessories).
Any usage beyond this must be
approved by the manufacturer in each
individual case.
Incorrect usage or operation of the
appliance (e.g. the appliance being
opened by the system user) is prohibi-
ted and will result in an exclusion of lia-
bility. Incorrect usage also occurs if the
components in the heating system are
modified from their intended use (e.g. if
the flue gas and ventilation air paths
are sealed).
Information
9