Troubleshooting; Self-Test - Dell SE2417HGX User Manual

Troubleshooting

WARNING: Before you begin any of the procedures in this section, follow the
instructions.

Self-test

Your monitor provides a self-test feature that allows you to check if your monitor is
functioning properly. If your monitor and computer are properly connected but the monitor
screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Disconnect all video cables from the monitor. This way, the computer doesn't have to
be involved.
3. Turn on the monitor.
If the monitor is working correctly, it detects that there is no signal and one of the following
message appears. While in self-test mode, the power LED remains white.
Dell 24 Monitor
?
No VGA Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/SE2417HGX
Dell 24 Monitor
?
No HDMI 1 Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/SE2417HGX
Safety
SE2417HGX
SE2417HGX
Troubleshooting |
33