Settings - IKEA RENGORA Manual

ENGLISH
Programme
Normal soil
4)
Crockery and
50 °C
cutlery
All
5)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) This programme is indicated for heavy soil loading to get the sufficient cleaning results on pots and pans.
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. (This is the standard programme for test institutes).
5) Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance. Do not use detergent with this programme.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product
number code (PNC) found on the rating
plate.

Settings

Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the acoustic
signal for the end of a programme.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AutoOpen.
Degree of soil Programme pha-
Type of load
• Prewash
• Wash 50 °C
• Rinses
• Dry
• Prewash
ses
Duration
(min)
240
14
For any other questions regarding your
dishwasher please refer to the service book
provided with your appliance.
As the appliance stores the saved
settings, there is no need to configure it
before every cycle.
How to set the programme selection mode
The appliance is in programme selection
mode when only the indicator of the
programme
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode the
following way:
Consumption values
1)
Energy
(kWh)
1.050 12
0.1 4
is on.
9
Water
(l)