Introduction - Argox AS-8060 User Manual

AS-8060
User Guide

Introduction

Your AS-8060 is a 1D CCD scanner that has
been configured at the factory with default
settings.
Since many host systems have unique
formats and protocol requirements, Argox
provides a wide range of configurable
features that may be selected using this bar
code based configuration tool. Once the
configuration is completed, the scanner
stores the settings in nonvolatile memory.
The embedded memory saves the settings
when the power is turned off.
Turn off the computer's power before
connecting the scanner, and then power up
the computer once the scanner is fully
connected.
You can change a parameter value in the
way described below:
 Scan the appropriate bar codes in this
guide. These new values replace the
standard default values in memory.
NOTE: Most computer monitors allow scanning the
bar codes directly on the screen. When
scanning from the screen, be sure to set the
document magnification to a level where
you can see the bar code clearly, and bars
and/or spaces are not merging.
1